Hikvision DS-KH6320-WTE1 Configuration Guide - Page 27
Set Wi-Fi, Language, Network, Auto Get IP Address, Door Lock Parameters, Volume, Call Number
View all Hikvision DS-KH6320-WTE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Network Indoor Station Configuration Guide 3. Select a device to link. Edit the following parameters. Name You can edit the name of the device. Language Select a language from the drop-down list for the device. Network Enable Auto Get IP Address and the system will assign IP address, subnet mask, and gateway automatically. Or edit the IP address, subnet mask, and gateway manually. Door Lock Parameters After wire the lock with the door station, you can set name and door opening duration according to your needs. Note Up to 2 locks can be configured. Volume Settings Set microphone volume and output volume. Call Number Settings The call No. should be the same as the indoor station's room No. If press the call button of the door station, you can call the indoor station directly. Public Password You can use the public password to open the door station related door lock. Select the public password type. Enter the old password and new password and then confirm the new password. Tap OK to save the settings. Restore to Default Settings Restore All All parameters will be restored to the factory settings. The system will reboot to take effect. Device Reboot Reboot the device. 3.3.3 Set Wi-Fi Some indoor station support Wi-Fi connection. Note Parts of models support setting Wi-Fi. For details, refers to actual product. 18