Home » Hikvision Manuals » Electronics Accessories » Hikvision DS-KH6320-WTE1 » Manual Viewer

Hikvision DS-KH6320-WTE1 Configuration Guide - Page 69

Network, Local Network Configuration

View all Hikvision DS-KH6320-WTE1 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Network Indoor Station Configuration Guide 4. Enter the required information. Serial No. Enter the device's serial No.. The serial No. is on the rear panel of the device (A fixed-length number with 9 digits). IP Address Enter the device's IP address. Gateway Enter the device's gateway. Subnet Mask Enter the device's subnet mask. Password Enter the device password, ranging from 8 to 16 characters in length. No. Enter the device No., ranging from 1 to 5. 5. Click Save to enable the settings. 6. Set SIP information. Click Configure Configure serial No., IP address, gateway, subnet mask, password and No. of the device. Click Delete Delete the SIP Number. Click Clear Clear all SIP numbers. Click Refresh Refresh SIP Information. 4.3.3 Network Local Network Configuration Steps 1. Click Local Network Configuration to enter the configuring the local network parameters page. 60

Section	Page
Legal Information	2
Symbol Conventions	4
Regulatory Information	5
Chapter 1 About this Manual	10
Chapter 2 Activation	11
2.1 Activate via iVMS-4200 Client Software	11
Chapter 3 Local Operation	12
3.1 Quick Operation (For DS-KH6320EY-WTE2)	12
3.2 Quick Operation (For Normal Device)	17
3.3 Basic Settings	24
3.3.1 Set Indoor Station Network Parameters	25
3.3.2 Set Linked Device IP	26
3.3.3 Set Wi-Fi	27
3.3.4 Set Indoor Station No.	28
3.3.5 SIP Settings	30
3.3.6 Add Camera	31
3.3.7 Zone and Alarm Settings	32
Zone Settings	32
Arming Mode Settings	33
3.4 Password Settings	34
3.4.1 Change Admin Password	34
3.4.2 Security Settings	35
3.4.3 Modify Arm/Disarm Password	35
3.4.4 Modify Unlock/Duress Code	37
3.5 Synchronize Time	38
3.6 Sound Settings	38
3.6.1 Call Settings	39
3.6.2 Volume Settings	41
3.7 Via the mobile client	41
3.7.1 Link to the Mobile Client	41
3.7.2 Unlink the Account	42
3.8 System Settings	44
3.9 Output Settings	48
3.10 Device Information	49
Chapter 4 Remote Operation via the Client Software	50
4.1 Device Management	50
4.1.1 Add Video Intercom Devices	50
4.1.2 Modify Network Information	52
4.2 System Configuration	53
4.3 Remote Configuration	53
4.3.1 System	53
4.3.2 Video Intercom	59
Time Parameters	59
Permission Password	60
Zone Alarm	61
Network Camera Information	63
Add Camera	63
Export and Import Added Device Information	63
Volume Input and Output	64
Ring Import	65
Arming Information	66
Relay	66
SIP No. Settings	66
4.3.3 Network	69
Local Network Configuration	69
SIP Server Configuration	70
DNS Settings	71
Configure Mobile Client Connection	72
Group Network Settings	72
4.4 Person Management	73
4.4.1 Organization Management	74
Add Organization	74
Modify and Delete Organization	75
4.4.2 Person Management	75
Add Person	75
Import and Export Person Information	76
Get Person Information from Device	76
Modify and Delete Person	77
Change Person to Other Organization	77
Appendix A. Relevant Instructions for External Power Supply and Wiring of 2-wire Video Intercom Products (2020-1-20)	78