Hikvision DS-KH6320-WTE1 Configuration Guide - Page 37
Modify Unlock/Duress Code, Scene Password, Steps, Password, Unlock and Duress Code
View all Hikvision DS-KH6320-WTE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Network Indoor Station Configuration Guide 3. When you slide to disable Scene Password, there is no needs to enter password during scene mode switching. 3.4.4 Modify Unlock/Duress Code You can create and edit the duress code and unlock password of the indoor station. Steps 1. Tap Settings → 2. Tap Password. → Configuration , and enter admin (activation) password. Figure 3-28 Unlock and Duress Code Settings Page 3. Tap Unlock Password or Duress Code to pop up the password settings dialog box. Unlock Password Create the indoor station's unlock password. If the device has connected to a lock, enter the password to unlock. Duress Code When you are hijacked and forced to open the door, you can enter the duress code. An alarm will be triggered to notify the management center secretly. Note The duress code and the unlock password cannot be the same. 4. Create a new password and confirm it. 5. Tap OK to save the settings. 28