Hikvision DS-KH6320-WTE1 Configuration Guide - Page 38
Synchronize Time, 3.6 Sound Settings, Steps, → Time and Date, Date Format, Sync Tim
View all Hikvision DS-KH6320-WTE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Network Indoor Station Configuration Guide 3.5 Synchronize Time Steps 1. Tap Settings → → Time and Date to enter the time synchronization page. 2. Tap Date Format and Time Format to set the time format. 3. Optional: Tap Time to set time manually. 4. Tap Sync Tim. Figure 3-29 Time Synchronization 1) Select the Time Zone. 2) Enable Enable NTP. 3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No. Note ● The default unit of synchronizing interval is minute. ● The time zone can be configured as well if the NTP is not enabled. 3.6 Sound Settings Set the ringtone sound, the volume, and the auto answer. 29
3.5 Synchronize Time
Steps
1.
Tap
Se±ngs
→
→ Time and Date
to enter the
°me
synchroniza°on
page.
2.
Tap
Date Format
and
Time Format
to set the
°me
format.
3.
Op°onal:
Tap
Time
to set
°me
manually.
4.
Tap
Sync Tim
.
Figure 3-29 Time
Synchroniza°on
1) Select the
Time Zone
.
2) Enable
Enable NTP
.
3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No.
Note
●
The default unit of synchronizing interval is minute.
●
The
°me
zone can be
configured
as well if the NTP is not enabled.
3.6 Sound
Se±ngs
Set the ringtone sound, the volume, and the auto answer.
Network Indoor
Sta°on
Configura°on
Guide
29