Hikvision DS-KH6320-WTE1 Configuration Guide - Page 25
Set Indoor Station Network Parameters
View all Hikvision DS-KH6320-WTE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Network Indoor Station Configuration Guide 3.3.1 Set Indoor Station Network Parameters Network connection is mandatory for the use of the indoor station. Set the network parameters after activating the indoor station. Only when the IP address of the indoor station is in the same network segment as other devices, it can work properly in the same system. Steps Note The default IP address of the indoor station is 192.0.0.64. Two ways are available for you to set IP address: DHCP, and set IP address manually. 1. Tap Settings → → Configuration , and enter admin (activation) password. 2. Tap to enter the network settings page. Figure 3-17 Network Settings 3. Set the network parameters. - Enable DHCP, and the system can assign an IP address of the indoor station automatically. - Disable the DHCP function, and set the IP address manually. You should set the device IP address, the gateway, the DNS address. 16