Hitachi HTS541680J9AT00 Specifications - Page 108

Travelstar 5K160 (PATA) Hard Disk Drive Specification 85 74xxH Command set/feature enabled 15 (=0) Obsolete 14 (=1) 1=NOP command supported 13 (=1) 1=READ BUFFER command supported 12 (=1) 1=WRITE BUFFER command supported 11 (=0) Reserved **10 (=1) 1=Host Protected Area Feature Set supported 9 (=0) 1=DEVICE RESET command supported 8 (=0) 1=SERVICE interrupt enabled 7 (=0) 1=release interrupt enabled 6 (=x) 1=look-ahead enabled 5 (=x) 1=write cache enabled 4 (=0) 1=supports PACKET Command Feature Set 3 (=1) 1=supports Power Management Feature Set 2 (=0) 1=supports Removable Media Feature Set 1 (=x) 1=Security Feature Set enabled 0 (=x) 1=S.M.A.R.T Feature Set enabled 86 3xxxH Command set/feature enabled * 15- 14 (=0) Reserved 13 (=1) 1=FLUSH CACHE EXT command supported 12 (=1) 1= FLUSH CACHE command supported 11 (=x) 1=Device Configuration Overlay supported * 10 (=1) 1= 48-bit Address feature set supported 9 (=x) 1=Automatic Acoustic Management enabled 8 (=x) 1=SET MAX security extension enabled * 7 (=x) 1=Address Offset mode enabled 6 (=1) 1=SET FEATURES subcommand required to spin-up 5 (=x) 1=Power-Up In Standby feature set has been enabled via the SET FEATURES command 4 (=0) 1=Removable Media Status Notification Feature Set enabled 3 (=x) 1=Advanced Power Management Feature Set enabled 2 (=0) 1=CFA Feature Set supported 1 (=0) 1=READ/WRITE DMA QUEUED command supported 0 (=1) 1=DOWNLOAD MICROCODE command supported Note.1 The '*' mark in 'Content' field indicates the use of those parameters that are vendor specific. Note.2 The feature marked '**' is able to be unsupported by the Device Configuration Overlay command. Figure 56 Identify device information --- Continued --- 108/188