Hitachi HTS541680J9AT00 Specifications - Page 147
B=0, MAX LBA/CYL which is set by Set Max ADDRESS command will
UPC - 683728200794
View all Hitachi HTS541680J9AT00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
LBA Low LBA High/Mid H L D Travelstar 5K160 (PATA) Hard Disk Drive Specification B=0, MAX LBA/CYL which is set by Set Max ADDRESS command will be lost by POR and HARD RESET. B=1 is not valid when the device is in Address Offset mode, and the command is aborted. in LBA mode, this register contains LBA bits 0 - 7 which is to be input.(L=1) In CHS mode, this register is ignored. (L=0) In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High) which is to be set. (L=1) In CHS mode, this register contains max cylinder number which is to be set. (L=0) In LBA mode, this register contains LBA bits 24 - 27 which is to be input.(L=1) In CHS mode, this register is ignored. (L=0) LBA mode. Indicates the addressing mode. L=0 specifies CHS mode and L=1 does LBA addressing mode. The device number bit. Indicates that the device number bit of the Device should be specified. D=0 selects the master device and D=1 selects the slave device. Input Parameters From The Device LBA Low LBA High/Mid H In LBA mode, this register contains Adjusted max LBA bits 0 - 7.(L=1) In CHS mode, this register contains max LBA Low(= 63). (L=0) In LBA mode, this register contains Adjusted max LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1) In CHS mode, this register contains max cylinder number which is set. (L=0) In LBA mode, this register contains Adjusted max LBA bits 24 - 27. (L=1) In CHS mode, this register contains max head number(= 15).(L=0) 147/188