Hitachi HTS541680J9AT00 Specifications - Page 182

SET FEATURES Command Support, Coverage, Changed Points from HTS4212xxH9AT00

Page 182 highlights

16.2 Travelstar 5K160 (PATA) Hard Disk Drive Specification SET FEATURES Command Support Coverage The following table is provided to facilitate the understanding of HTS5416XXJ9AT00 "Set Features" command support coverage comparing to the ATA-7 defined command set. The column of 'Implementation' shows the capability of HTS5416XXJ9AT00 for those commands. For detail operation, refer to "14.34 Set Features (EFh)" on page 144. Features Register Features Name Implementation for HTS5416XXJ9AT00 02h Enable write cache Yes 03h Set transfer mode Yes 05h Enable Advanced Power Management Yes 06h Enable Power-Up in Standby feature set Yes 07h Power-Up in Standby device spin-up Yes 09h Enable Address Offset mode Yes 31h Disable Media Status Notification No 42h Enable Automatic Acoustic Management Yes 44h Set vendor specific bytes ECC Yes 55h Disable read look-ahead feature Yes 5Dh Enable release interrupt No 5Eh Enable SERVICE interrupt No 66h Disable reverting to power on defaults Yes 82h Disable write cache Yes 85h Disable Advanced Power Management Yes 86h Disable Power-UP in Standby Yes 89h Disable Address Offset mode Yes 95h Enable Media Status Notification No AAh Enable read look-ahead feature Yes BBh Set 4 bytes ECC Yes C2h Disable Automatic Acoustic Management Yes CCh Enable reverting to power on defaults Yes DDh Disable release interrupt No DEh Disable SERVICE interrupt No others Reserved Reserved Figure 135 SET FEATURES Command coverage 16.3 Changed Points from HTS4212xxH9AT00 This specification is copied from HTS4212XXH9AT00. The changed points are described below. Product ID Time to format Idle Immediate command with Unload Feature 182/188

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

Travelstar 5K160 (PATA) Hard Disk Drive Specification
182
/
188
16.2
SET FEATURES Command Support
Coverage
The following table is provided to facilitate the understanding of HTS5416XXJ9AT00 "Set Features" command
support coverage comparing to the ATA-7 defined command set. The column of 'Implementation' shows the
capability of HTS5416XXJ9AT00 for those commands. For detail operation, refer to "14.34 Set Features (EFh)" on
page 144.
Features Register
Features Name
Implementation for
HTS5416XXJ9AT00
02h
Enable write cache
Yes
03h
Set transfer mode
Yes
05h
Enable Advanced Power Management
Yes
06h
Enable Power-Up in Standby feature set
Yes
07h
Power-Up in Standby device spin-up
Yes
09h
Enable Address Offset mode
Yes
31h
Disable Media Status Notification
No
42h
Enable Automatic Acoustic Management
Yes
44h
Set vendor specific bytes ECC
Yes
55h
Disable read look-ahead feature
Yes
5Dh
Enable release interrupt
No
5Eh
Enable SERVICE interrupt
No
66h
Disable reverting to power on defaults
Yes
82h
Disable write cache
Yes
85h
Disable Advanced Power Management
Yes
86h
Disable Power-UP in Standby
Yes
89h
Disable Address Offset mode
Yes
95h
Enable Media Status Notification
No
AAh
Enable read look-ahead feature
Yes
BBh
Set 4 bytes ECC
Yes
C2h
Disable Automatic Acoustic Management
Yes
CCh
Enable reverting to power on defaults
Yes
DDh
Disable release interrupt
No
DEh
Disable SERVICE interrupt
No
others
Reserved
Reserved
Figure 135 SET FEATURES Command coverage
16.3
Changed Points from HTS4212xxH9AT00
This specification is copied from HTS4212XXH9AT00.
The changed points are described below.
y
Product ID
y
Time to format
y
Idle Immediate command with Unload Feature