Hitachi HTS541680J9AT00 Specifications - Page 169

Travelstar 5K160 (PATA) Hard Disk Drive Specification 14.44 Write DMA EXT (35h) Command Block Output Registers Register 76543210 Data Low -------- Data High -------- Feature Current Previous Sector Count Current V V V V V V V V Previous V V V V V V V V LBA Low Current V V V V V V V V Previous V V V V V V V V LBA Mid Current V V V V V V V V Previous V V V V V V V V LBA High Current V V V V V V V V Previous V V V V V V V V Device - 1 -D- - - - Command 00110101 Command Block Input Registers Register 76543210 Data Low -------- Data High -------- Error ...See Below... Sector Count LBA Low LBA Mid LBA High Device Status HOB=0 HOB=1 HOB=0 V V V V V V V V HOB=1 V V V V V V V V HOB=0 V V V V V V V V HOB=1 V V V V V V V V HOB=0 V V V V V V V V HOB=1 V V V V V V V V V See Below... Error Register 7 65432 1 0 CRC UNC 0 IDN 0 ABT T0N AMN V 0 0V0V 0 0 Figure 123 Write DMA EXT Command (35h) Status Register 7 654 3 2 1 0 BSY RDY DF DSC DRQ COR IDX ERR 0 V0V - 0 - V The Write DMA Ext command transfers one or more sectors of data from the host to the device, then the data is written to the disk media. The sectors of data are transferred through the Data Register 16 bits at a time. The host initializes a slave-DMA channel prior to issuing the command. Data transfers are qualified by DMARQ and are performed by the slave-DMA channel. The device issues only one interrupt per command to indicate that data transfer has terminated and status is available. If an uncorrectable error occurs, the write will be terminated at the failing sector Output Parameters To The Device Sector Count Current The number of continuous sectors to be transferred low order, bits (7:0). Sector Count Previous The number of continuous sectors to be transferred high order bits (15:8). If zero is specified in the Sector Count register, then 65,536 sectors will be transferred. LBA Low Current LBA (7:0). LBA Low Previous LBA (31:24). LBA Mid Current LBA (15:8). LBA Mid Previous LBA (39:32). LBA High Current LBA (23:16). LBA High Previous LBA (47:40). Input Parameters From The Device LBA Low (HOB=0) LBA (7:0) of the address of the first unrecoverable error. LBA Low (HOB=1) LBA (31:24) of the address of the first unrecoverable error. LBA Mid (HOB=0) LBA (15:8) of the address of the first unrecoverable error. LBA Mid (HOB=1) LBA (39:32) of the address of the first unrecoverable error. LBA High (HOB=0) LBA (23:16) of the address of the first unrecoverable error. LBA High (HOB=1) LBA (47:40) of the address of the first unrecoverable error. 169/188