Husqvarna AUTOMOWER SOLAR HYBRID Operation Manual - Page 15

2. PRESENTATION Search method 3: Follow guide wire Automower® runs irregularly until it reaches the guide wire. The mower then follows the guide wire in to the charging station. The guide wire is an extra wire that is laid from the charging station, out towards a remote part of the working area or through a narrow passage and is then connected to the boundary wire. Up to two guide wires can be installed for Solar Hybrid. For more information, see 3.8 Installation of the guide wire on page 32. This search method is best for an installation that has numerous or large islands, narrow passages or steep slopes. The advantage of this search method is that the search times are generally short. The disadvantage is that the mower can leave tracks in the grass along the length of the guide wire. 2.4 More than one Automower® in a garden If you install more than one Automower® in the same area of lawn, each mower must have its own PIN code. A complete installation, including charging station, is required for each mower. The boundary wires for the different installations can be routed next to each other. Contact your dealer for further information. 2.5 One Automower® in several gardens One Automower® can easily be used for more than one garden, where each garden has its own charging station and boundary wire. The mower can then have the same PIN code for all gardens. Contact your dealer for further information. 16 - English