Husqvarna AUTOMOWER SOLAR HYBRID Operation Manual - Page 66
Replacing the blades
![]() |
View all Husqvarna AUTOMOWER SOLAR HYBRID manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
8. MAINTENANCE Chassis Clean the underside of the chassis. Brush or wipe with a damp cloth. Wheels Clean around the front and rear wheels and around the front wheel suspension. Body Use a damp, soft sponge or cloth to clean the body and solar cell panel. If the body and solar cell panel are very dirty, it may be necessary to use a soap solution or washing-up liquid. 8.6 Replacing the blades WARNING Always use originalblades and screws when replacing. Only replacing the blades and reusing the screw can result in the screw wearing during mowing and shearing off. The blades can then be thrown out and cause serious injury. There are three blades on Automower®, which are screwed into the blade disc. The blades have two edges to ensure a longer service life. The blade disc rotates alternately to the left and alternately to the right. All three blades and screws must be replaced at the same time to obtain a balanced mowing system. There are several different types of mower blades to choose from as accessories, with different features. Use Husqvarna AB approved blades only, see the table. Please contact your dealer for more information. Blade type Stainless steel (two-toothed, stainless) Quantity/Packaging 9 30 500 Part number 535 13 87-01 535 13 88-01 505 12 78-01 English - 67
![](/manual_guide/products/husqvarna-automower-solar-hybrid-operation-manual-e447411/66.png)