Husqvarna AUTOMOWER SOLAR HYBRID Operation Manual - Page 8

Transport, Maintenance

Get Husqvarna AUTOMOWER SOLAR HYBRID PDF manuals and user guides View all Husqvarna AUTOMOWER SOLAR HYBRID manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

1. INTRODUCTION AND SAFETY Transport The original packaging should be used when transporting Automower® over long distances. To safely move from or within the working area: 1. Press the STOP button to stop the mower. If the alarm, (see page 56) used to prevent theft, has been activated, open the solar cell panel using the cut-out on the back edge of the panel and enter the first number of the PIN code. You select the four digit PIN code when you start the mower for the first time, see page 31. 2. Move the main switch to the OFF position if you intend to carry the mower. 3. Carry the mower by the handle at the rear under the mower. Carry the mower with the blade disc away from the body. Maintenance WARNING When the mower is turned upside down the main switch must always be set to the OFF position. The main switch should be set to the OFF position during all work on the mower's underframe, such as cleaning or replacing the blades. • Inspect Automower® each week and replace any damaged or worn parts. Check especially that the blades and blade disc are not damaged. Replace all blades and screws at the same time if necessary so that the rotating parts are balanced, see 8. Maintenance on page 64. ON OFF English - 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
English - 9
1. INTRODUCTION AND SAFETY
Transport
The original packaging should be used when
transporting Automower
®
over long distances.
To safely move from or within the working area:
1.
Press the
STOP
button to stop the mower.
If the alarm, (see page 56) used to prevent theft,
has been activated, open the solar cell panel
using the cut-out on the back edge of the panel
and enter the first number of the PIN code.
You select the four digit PIN code when you start
the mower for the first time, see page 31.
2.
Move the main switch to the
OFF
position if you
intend to carry the mower.
3.
Carry the mower by the handle at the rear under
the mower. Carry the mower with the blade disc
away from the body.
Maintenance
•
Inspect Automower
®
each week and replace any
damaged or worn parts.
Check especially that the blades and blade disc
are not damaged. Replace all blades and screws
at the same time if necessary so that the rotating
parts are balanced, see
8. Maintenance
on
page 64.
WARNING
When the mower is turned upside
down the main switch must always
be set to the
OFF
position.
The main switch should be set to the
OFF
position during all work on the
mower’s underframe, such as
cleaning or replacing the blades.
ON
OFF