Husqvarna AUTOMOWER SOLAR HYBRID Operation Manual - Page 70

Fault symptom

Get Husqvarna AUTOMOWER SOLAR HYBRID PDF manuals and user guides View all Husqvarna AUTOMOWER SOLAR HYBRID manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

9. TROUBLE SHOOTING 9.2 Fault symptom If your Automower® does not work correctly, follow the trouble shooting guide below. If the fault persists; contact your dealer. Symptom Cause Action Uneven mowing results Automower® works too few hours per Increase the mowing time, see 6.4 day. Timer (2) on page 46. Working area too large. Try limiting the working area or extending the working time, see 6.4 Timer (2) on page 46. Dull blades. Replace all the blades and screws so that the rotating parts are balanced. Long grass in relation to the set cutting Increase the cutting height and then height. successively lower. The mower seems to work more at the Change the Installation shape (3-3) top of a slope than at the bottom. setting to Open. Accumulation of grass by the blade disc or around the motor shaft. Check that the skid plate and blade disc rotate easily. If not, the skid plate and perhaps the blade disc must be removed and the grass and foreign objects removed. See 8.5 Cleaning on page 66. Automower® runs at The clock on Automower® needs to be Set the clock, see Time and date (4-3) the wrong time set. on page 57. The start and stop times for mowing are incorrect. Adjust the start and stop time settings for mowing, see 6.4 Timer (2) on page 46. Automower® vibrates Unbalanced blade disc or damaged blades. Inspect the blades and screws and replace them if necessary. Automower® runs, but Automower® is looking for the charging No action. The blade disc does not the blade disc does station. rotate when the mower is searching for not rotate the charging station. The mower mows for shorter periods than usual between charges Grass or a foreign object is blocking the blade disc or skid plate. Dismantle and clean the skid plate and blade disc. Both the mowing and This behaviour is normal in high charging times are temperatures (gradually increasing shorter than usual above 25 °C). No action. Automower® starts mowing directly outside of the charging station instead of following the loop out Change corridor width and/or reversing distance. English - 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
English - 71
9. TROUBLE SHOOTING
9.2 Fault symptom
If your Automower
®
does not work correctly, follow the trouble shooting guide below. If the fault persists;
contact your dealer.
Symptom
Cause
Action
Uneven mowing
results
Automower
®
works too few hours per
day.
Increase the mowing time, see
6.4
Timer (2)
on page 46.
Working area too large.
Try limiting the working area or
extending the working time, see
6.4
Timer (2)
on page 46.
Dull blades.
Replace all the blades and screws so
that the rotating parts are balanced.
Long grass in relation to the set cutting
height.
Increase the cutting height and then
successively lower.
The mower seems to work more at the
top of a slope than at the bottom.
Change the Installation shape (3-3)
setting to Open.
Accumulation of grass by the blade
disc or around the motor shaft.
Check that the skid plate and blade
disc rotate easily. If not, the skid plate
and perhaps the blade disc must be
removed and the grass and foreign
objects removed. See
8.5 Cleaning
on
page 66.
Automower
®
runs at
the wrong time
The clock on Automower
®
needs to be
set.
Set the clock, see
Time and date (4-3)
on page 57.
The start and stop times for mowing
are incorrect.
Adjust the start and stop time settings
for mowing, see
6.4 Timer (2)
on
page 46.
Automower
®
vibrates
Unbalanced blade disc or damaged
blades.
Inspect the blades and screws and
replace them if necessary.
Automower
®
runs, but
the blade disc does
not rotate
Automower
®
is looking for the charging
station.
No action. The blade disc does not
rotate when the mower is searching for
the charging station.
The mower mows for
shorter periods than
usual between
charges
Grass or a foreign object is blocking
the blade disc or skid plate.
Dismantle and clean the skid plate and
blade disc.
Both the mowing and
charging times are
shorter than usual
This behaviour is normal in high
temperatures (gradually increasing
above 25 °C).
No action.
Automower
®
starts
mowing directly
outside of the
charging station
instead of following
the loop out
Change corridor width and/or
reversing distance.