IBM 306m User Guide - Page 40
installation
UPC - 000435867605
View all IBM 306m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
9. Position the replacement fan so that the airflow arrow on the side of the fan is pointing toward the rear of the server. Note: Correct airflow is from the front to the rear of the server. Fan Fan bracket Fan bracket cable channel Fan bracket cable slot 10. To install the replacement fan in the bracket, complete the following steps: a. Make sure that the fan cable sits in the channel on the side of the fan. b. In the location from which you removed the failed fan, route the fan cable into its slot in the fan bracket top. c. Insert the fan into the bracket. d. Make sure that each of the blue soft tabs on the fan is fully seated in its slot in the fan bracket. 11. Connect the replacement fan cable to the system board. If you have other options to install, do so now. Otherwise, go to "Completing the installation" on page 30. 28 IBM xSeries 306m Types 8849 and 8491: User's Guide