Icom IC-2730A Instruction Manual - Page 17
■ Setting items, ◇ MENU mode, DMENU mode DEXMENU mode
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MENU MODE 2 ■■Setting items DDMENU mode See pages 18 to 22 for details of each MENU mode item's options and their default values. Tone Sets a channel tone type. Frequency offset Sets the frequency offset for duplex (repeater) operation. Repeater tone Sets a tone frequency used to access repeaters. TSQL frequency Sets a tone frequency for the Tone squelch function used in the FM mode. DTCS code Sets a DTCS (both encoder/decoder) code for DTCS squelch function used in the FM mode. DTCS polarity Sets the DTCS polarity for the DTCS squelch function. Tuning step Sets the tuning step to change the frequency in the selected step when rotating [DIAL]S. Backlight Sets the backlight brightness level. Priority scan Starts or stops the Priority scan. MENU MODE Pause timer Sets the scan pause time. When receiving signals, the scan pauses according to the scan pause timer. Resume timer Sets the scan resume time from a pause after the received signal disappears. Weather alert 2 Sets to sound a beep when a weather alert signal is detected on a preset weather channel. (Only for the USA version transceiver) Operating mode Sets the operating mode. Home channel Sets the often-used frequency as the Home channel in the VFO mode or Memory mode. EXMENU mode Push [ï]D or [≈]D to enter the EXMENU mode. DDEXMENU mode See the Icom website for details of the EXMENU mode items. Mode and Tuning step items Sets the operating mode and the tuning step. Operating mode* Sets the operating mode. Tuning step* Sets the tuning step to change the frequency in the selected step when rotating [DIAL]S. *You can set in the MENU mode. 12