Icom IC-2730A Instruction Manual - Page 46
■ VFO mode scan
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
5 SCAN OPERATION ■■VFO mode scan There are 6 scan types: Full scan, Band scan, Program scan, Program link scan, Duplex scan and Tone scan. NOTE: • T he frequencies that are set as "PSKIP" channels are skipped during a scan. • When the "P-SKIP" (Program Skip) item in the EXMENU is set to OFF, even the frequencies that are set as "PSKIP" channels are scanned. DDVFO mode scan qqPush [V/MHz SCAN]S. • Selects the VFO mode. wwHold down [V/MHz SCAN]S for 1 second. • Displays the scan type setting screen. eeRotate [DIAL]S to select a desired scan type. • ALL: Full scan • BAND: Band scan • P-LINK0~9: Program link scan • PROG00~PROG24: Program scan • DUP: Duplex scan (p. 50) (A ppears only when duplex is set.) • TONE: Tone scan rrPush [V/MHz SCAN]S to start the scan. ttTo cancel the scan, push [V/MHz SCAN]S. While scanning Blinks Blinks Displays the scan type When receiving a signal Blinks Blinks The S-meter shows the received signal strength. When a scan name is assigned. (p. 13) When a scan name is assigned, it is displayed on the scan type setting screen. (Step e on this page) See page 39 to enter a scan name. When a program link name is assigned. (p. 14) When a program link name is assigned, it is displayed on the scan type setting screen. (Step e on this page) See the Icom website to enter a program link name. 41