Icom IC-2730A Instruction Manual - Page 50

6 PRIORITY WATCH ■■Priority watch While operating on a VFO frequency or while scanning, Priority watch checks for signals on a selected frequency every 5 seconds. • Y ou can make a Priority watch independently on both the left and right bands. • This section describes the MAIN band operation. DDVFO and a Priority channel (p. 46) Checks the selected Priority channel every 5 seconds, while receiving on a VFO frequency, or during a VFO mode scan. A Memory channel, Bank channel or Call channel can be selected as the Priority channel. Selecting a Memory channel VFO mode Receive or scan (5 seconds) Selected M-CH Selecting a Call channel VFO mode Receive or scan (5 seconds) CALL-CH Selecting a Bank channel VFO mode Receive or scan (5 seconds) Selected Bank CH 45 DDVFO and a Memory/Bank scan (p. 47) Sequentially checks the Memory or Bank channels every 5 seconds, while receiving on a VFO frequency or during a VFO mode scan. A Memory scan or Bank scan can be selected. Selecting a Memory scan VFO mode SKIP Receive or scan (5 seconds) 000 001 002 999 M-CH Selecting a Bank scan 00 VFO mode SKIP 01 Receive or scan 02 (5 seconds) 99 Bank CH Display Side Center Side The C, S, or D in the instructions indicate the area of the controller. C: Center S: Side D: Display