Icom IC-2730A Instruction Manual - Page 30
◇ Selecting a tuning step, ■ Setting audio volume andsquelch level, ■ Lock function
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3 BASIC OPERATION ■■ Setting a frequency (Continued) DDSelecting a tuning step Rotating [DIAL]S changes the frequency in the selected tuning steps. The VFO scan uses this step to search for a signal. (pp. 37, 41) qqPush [MAIN BAND]S on the band that the tuning step is set to. wwPush [MENU ]C. • Enters the MENU mode. eeRotate [DIAL]S to select "TS" (Tuning step). rrPush [ï]D. • Goes to the next tree level. ttRotate [DIAL]S to select the desired value. Selectable values: 5 kHz, 6.25 kHz, 8.33 kHz*, 10 kHz, 12.5 kHz, 15 kHz, 20 kHz, 25 kHz, 30 kHz, 50 kHz or AUTO*. *Appears only when the AIR band is selected. yyPush [ï]D. • Sets the selected value, and goes back to the previous tree level. uuPush [MAIN BAND]S. • Exits the MENU mode. iiRotate [DIAL]S. • The frequency changes in the selected tuning steps. 25 ■■Setting audio volume and squelch level • Y ou can make the setting on either the left or right band, regardless of the MAIN band setting. qqRotate [VOL]S to adjust the audio level. • Y ou can change the beep level in the "BEEPLV" (Beep Level) item of the MENU mode. (p. 16) (MENU-EXMENU > EXMEN-SOUNDS > SOUND-BEEPLV) wwRotate [SQL]S until the noise and the "BUSY" icon just disappear. • Rotating [SQL]S clockwise makes the squelch tight. Tight squelch is for strong signals. • W hen you rotate [SQL]S clockwise beyond the center position, [SQL]S becomes an 'S-meter Squelch' or 'Attenuator.' Select the [SQL]S option in the MENU mode. (p. 14) ■■Lock function You can use the Lock function to prevent accidental frequency changes and unnecessary function access on both the MAIN and SUB bands. ➥➥Hold down [MENU ]C for 1 second. • " " appears. • Hold down [MENU ]C again to cancel the function. • Y ou can still use [ ], [MONI DUP]C (only the Monitor function canceling), [PTT], [MAIN BAND]S (only the MAIN band selection), [MENU ]C (only the Lock function canceling), [SQL]S, and [VOL]S while the Lock function is ON.