Icom IC-2730A Instruction Manual - Page 51
■ VFO and a Priority channel, DVFO frequency and a Priority channel DVFO scan and a Priority channel
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
PRIORITY WATCH 6 ■■VFO and a Priority channel DDVFO frequency and a Priority channel Checks the selected Priority channel every 5 seconds, while receiving on a VFO frequency. qqSet the VFO frequency. (p. 24) wwSet the Priority channel. (p. 29) • Select a Memory channel, Bank channel or Call channel. eePush [MENU ]C. • Enters the MENU mode. rrRotate [DIAL]S to select "PRIO" (Priority scan). ttPush [ï]D. yyRotate [DIAL]S to select "ON" or "Bell." • ON: Starts Priority Watch. • Bell: Starts Priority Watch. When a signal is received on the Priority channel, the " " icon appears on the display. uuPush [ï]D. iiPush [MAIN BAND]S. • Exits the MENU mode. • The "PRIO" icon appears, and the Priority watch starts. • To cancel the Priority watch, select "OFF" in step y. Example: C hecks Memory channel "11" while receiving on 433.920 MHz. Appears Priority channel 6 Checks the Memory channel every 5 seconds. DDVFO scan and a Priority channel Checks the selected Priority channel every 5 seconds, during a VFO mode scan. qqDo steps q through i as shown to the left. • The "PRIO" icon appears, and the Priority watch starts. wwHold down [V/MHz SCAN]S for 1 second. eeRotate [DIAL]S to select a desired scan type. rrPush [V/MHz SCAN]S. • The VFO scan starts. PRIORITY WATCH 46