Icom IC-2730A Instruction Manual - Page 38
◇ Directly entering into a Memory bank, ◇ Selecting the Memory bank mode, MEMORY OPERATION
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 MEMORY OPERATION ■■ Setting a Memory bank (Continued) DDDirectly entering into a Memory bank You can also enter the memory content directly into a memory bank channel. This way is a short cut to creating a memory channel, and then assigning it to a bank. In that case, the transceiver automatically selects the lowest blank memory channel, to enter content into. Example: Writing 434.100 MHz into Bank group "A." qqPush [V/MHz SCAN]S. • Selects the VFO mode. wwSet the operating frequency to 434.100 MHz. eePush [MW]C to display the Memory write screen. rrRotate [DIAL]S to select "BANK." ttPush [ï]D. yyRotate [DIAL]S to select a Bank group "A." Select uuPush [ï]D. iiRotate [DIAL]S to select "WRITE." ooPush [ï]D. • Displays "WRITE?." !0 Rotate [DIAL]S to select "YES." !1 Push [ï]D. • Sounds beeps, writes the memory content to the bank channel, and returns to the VFO mode. 33 DDSelecting the Memory bank mode When you select the Memory bank mode, rotating [DIAL]S selects only the bank channels assigned to the selected bank. qqPush [MR CALL]S. • Selects the Memory mode. wwHold down [MAIN BAND]S for 1 second. eeRotate [DIAL]S to select a desired Bank group. • Displays the Bank name, if entered. rrPush [MAIN BAND]S. • Selects the Memory bank mode. ttRotate [DIAL]S to select a desired Bank channel. • Blank channels are not displayed. • T o return to the Memory channels display, select a Memory channel in step e. Display Side Center Side The C, S, or D in the instructions indicate the area of the controller. C: Center S: Side D: Display