Icom IC-2730A Instruction Manual - Page 47
■ Setting and clearing the skip frequencies, ◇ Setting the skip frequencies
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
SCAN OPERATION 5 ■■Setting and clearing the skip frequencies DDSetting the skip frequencies The frequencies set as "PSKIP" channels are not scanned. qqStart the VFO scan. (p. 41) • When a signal is received, the scan pauses. wwTo skip the frequency, hold down [MW]C for 1 second (until 3 beeps sound) while the scan is paused. • W hen a signal is received during the scan, the transceiver attempts to enter the frequency as a skip channel into empty memory channel 999. Blinks Skip frequency is entered into channel 999. • If channel 999 already has content, the transceiver automatically searches for another blank channel to enter. If no blank memory channel is found, a beep sounds, and no skip channel is set. eeAfter the skip channel is set, the scan resumes. DDClearing the skip frequencies qqPush [MR CALL]S. • Selects the Memory mode. wwRotate [DIAL]S to select the memory channel you want to clear as a skip channel. (Example: 999) 5 eePush [MW]C to display the Memory edit screen. rrRotate [DIAL]S to select "EDIT." ttPush [ï]D. yyRotate [DIAL]S to select "SKIP." uuPush [ï]D. iiRotate [DIAL]S to select "OFF." ooPush [ï]D. !0 Rotate [DIAL]S to select "WRITE." • Displays "OVERW?." !1 Rotate [DIAL]S to select "YES." !2 Push [ï]D. • Beeps sound. • Clears the skip setting. SCAN OPERATION The C, S, or D in the instructions indicate the area of the controller. C: Center, S: Side, D: Display For your reference: The skip setting is also cancelled when the memory channel set as a skip channel is deleted. (p. 35) 42