Icom IC-2730A Instruction Manual - Page 55
■ Duplex operation, ◇ Setting the frequency offset, ◇ Setting the duplex direction
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
7 REPEATER AND DUPLEX OPERATIONS ■■Duplex operation The Duplex operation shifts the transmit frequency up or down from the receive frequency by an offset amount. • This section describes the MAIN band operation. DDSetting the frequency offset qqEnters the MENU mode. (p. 11) wwRotate [DIAL]S to select "OFFSET" (Frequency Offset). eePush [ï]D. • Goes to the next tree level. DDSetting the duplex direction qqHold down [MONI DUP]C. • Displays the duplex direction setting screen. wwRotate [DIAL]S to select a desired option. • OFF: For simplex operation (the receive and transmit frequencies are the same). • DUP-: The transmit frequency shifts down from the re- ceive frequency by the offset amount. ("DUP-" appears.) 7 • DUP+: The transmit frequency shifts up from the receive frequency by the offset amount. ("DUP" appears.) REPEATER AND DUPLEX OPERATIONS rrRotate [DIAL]S to set a desired frequency offset. • Set to between 0.000.00 and 59.995 MHz. • T he selected tuning step in the VFO mode is used when setting the frequency offset. ttPush [ï]D. • Sets the selected value, and goes back to the previous tree level. yyPush [MAIN BAND]S. • Exits the MENU mode. eePush [MONI DUP]C. • Sets the selected offset direction. 50