Icom IC-2730A Instruction Manual - Page 48
■ Memory scan, ◇ Memory (skip) scan
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
5 SCAN OPERATION ■■Memory scan There two types of scans in the memory mode; Memory scan and Memory bank scan. DDMemory (skip) scan Repeatedly scans all programmed Memory channels. • T wo or more memory channels, which are not set as skip channels, must be programmed into start a memory scan. qqPush [MR CALL]S. • Selects the Memory mode. wwHold down [V/MHz SCAN]S for 1 second. • Displays the scan type setting screen. eeRotate [DIAL]S to select a desired scan type. • ALL: Full scan • BAND: Band memory scan • MODE: Mode memory scan • DUP: Duplex scan (p. 50) (Appears only when duplex is set.) • TONE: Tone scan rrPush [V/MHz SCAN]S to start the scan. ttTo cancel the scan, push [V/MHz SCAN]S. The C, S, or D in the Display Side Center Side instructions indicate the area of the controller. C: Center S: Side D: Display 43 DDMemory bank scan A memory bank scan searches through the memory channels in the selected bank. • T wo or more memory channels, that are not set as skip channels, must be programmed to start a memory bank scan. qqPush [MR CALL]S. • Selects the Memory mode. wwHold down [MAIN BAND]S for 1 second. eeRotate [DIAL]S to select the desired Bank group. rrPush [MAIN BAND]S. • Selects the Memory bank mode. ttHold down [V/MHz SCAN]S for 1 second. • Displays the scan type setting screen. yyRotate [DIAL]S to select a desired scan type. • ALL: Full bank scan • B-LINK: Bank link scan • BANK-A~BANK-J: Bank scan (Only banks which contain memory channels are displayed.) • DUP: Duplex scan (p. 50) (Appears only when duplex is set.) • TONE: Tone scan uuPush [V/MHz SCAN]S to start the scan. iiTo cancel the scan, push [V/MHz SCAN]S. When a bank name is assigned. The name is displayed on the scan type setting screen. See page 34 to enter the bank name.