Home » Icom Manuals » Two-Way Radios » Icom IC-2730A » Manual Viewer

Icom IC-2730A Instruction Manual - Page 24

Repeater Tone, Default: 88.5, TSQL Freq, Offset frequency, Default: 0.600.00, MENU items Continued

Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

2 MENU MODE ■■ MENU items (Continued) • DTC.TSQ: When you transmit, the DTCS code is superimposed on your normal signal. When you receive, the tone squelch opens only for a signal that includes a matching tone frequency. (Audio is heard) • DTCS code setting: "CODE" • DTCS polarity setting: "DTCS-P" • Tone frequency setting: "C TONE" • TON.TSQ: When you transmit, the subaudible tone is superimposed on your normal signal. When you receive, the tone squelch opens only for a signal that includes a matching tone frequency. (Audio is heard) • Subaudible tone setting: "R TONE" • Tone frequency setting: "C TONE" Offset frequency (Default: 0.600.00*) Set the frequency offset for duplex (repeater) operation to between 0 and 59.99500 MHz. • T he duplex shift direction (DUP-/DUP) is set in the duplex setting screen that is displayed when you hold down [MONI DUP]C for 1 second in the VFO mode. (p. 50) *The default value may differ, depending on the frequency band (selected as the Main band before entering the MENU mode) and the transceiver version. 19 Repeater Tone (Default: 88.5) Select a CTCSS tone frequency for repeater or other tone squelch access. 50 tone frequencies (67.0~254.1 Hz) are selectable. TSQL Freq (Default: 88.5) Select a CTCSS tone frequency for the tone squelch or the Pocket beep function. 50 tone frequencies (67.0~254.1 Hz) are selectable. • T one frequencies (Unit: Hz) 67.0 085.4 107.2 136.5 165.5 186.2 210.7 254.1 69.3 088.5 110.9 141.3 167.9 189.9 218.1 71.9 091.5 114.8 146.2 171.3 192.8 225.7 74.4 094.8 118.8 151.4 173.8 196.6 229.1 77.0 097.4 123.0 156.7 177.3 199.5 233.6 79.7 100.0 127.3 159.8 179.9 203.5 241.8 82.5 103.5 131.8 162.2 183.5 206.5 250.3

Section	Page
Front cover	1
FOREWORD	2
EXPLICIT DEFINITIONS	2
IMPORTANT	2
SUPPLIED ACCESSORIES	2
PRECAUTIONS	3
TABLE OF CONTENTS	5
1 PANEL DESCRIPTION	6
■ Controller — Front panel	6
■ Controller — Display	7
■ Main unit	10
■ About the HM-207 microphone	11
2 MENU MODE	14
■ MENU mode screen	14
■ MENU mode construction	14
■ Selecting the MENU item	16
■ Setting items	17
◇ MENU mode	17
◇ EXMENU mode	17
■ MENU items	23
3 BASIC OPERATION	28
■ Selecting the MAIN band	28
■ Selecting the Mode	28
◇ VFO mode	28
◇ Memory mode	28
◇ Call channel mode	28
◇ Weather channel mode	28
■ Selecting the operating band	29
■ Setting a frequency	29
◇ Selecting a tuning step	30
■ Setting audio volume andsquelch level	30
■ Lock function	30
■ Transmitting	31
■ Selecting the operating mode	31
■ Audio mute function	32
■ Monitor function	32
■ Setting the microphone gain level	32
4 MEMORY OPERATION	33
■ General description	33
◇ The number of the Memory channel	33
◇ Memory channel content	33
■ Selecting a Memory or Call channel	34
◇ Selecting a Memory channel	34
◇ Selecting a Call channel	34
■ Writing into a Memory or Call channel	35
◇ Writing into the selected channel	35
◇ Writing into a blank channel	35
◇ Copying Memory content to the VFO	36
◇ Copying Memory content to another Memory channel	36
■ Setting a Memory bank	37
◇ Assigning a Memory channel to a Memory bank	37
◇ Directly entering into a Memory bank	38
◇ Selecting the Memory bank mode	38
■ Entering a Memory or Bank name	39
■ Clearing a Memory channel	40
5 SCAN OPERATION	41
■ About the scan function	41
◇ VFO scan	41
◇ Memory scan	41
◇ Memory bank scan	41
◇ [DIAL] operation during a scan	42
◇ Tuning step for a VFO scan	42
◇ Skip function	42
◇ Scan Stop Beep function	42
◇ Receive mode during a scan	43
◇ When a signal is received	43
◇ Scan name	43
■ Entering scan edges	43
■ VFO mode scan	46
◇ VFO mode scan	46
■ Setting and clearing the skip frequencies	47
◇ Setting the skip frequencies	47
◇ Clearing the skip frequencies	47
■ Memory scan	48
◇ Memory (skip) scan	48
◇ Memory bank scan	48
■ Setting and clearing skipchannels	49
■ Setting the temporary skipfunction	49
6 PRIORITY WATCH	50
■ Priority watch	50
◇ VFO and a Priority channel	50
◇ VFO and a Memory/Bank scan	50
■ VFO and a Priority channel	51
◇ VFO frequency and a Priority channel	51
◇ VFO scan and a Priority channel	51
■ VFO and a Memory/Bank scan	52
◇ VFO frequency and a Memory/Bank scan	52
◇ VFO scan and a Memory/Bank scan	52
7 REPEATER AND DUPLEX OPERATIONS	53
■ Repeater operation	53
◇ Checking the repeater input signal	54
◇ 1750 Hz tone burst	54
■ Duplex operation	55
◇ Setting the frequency offset	55
◇ Setting the duplex direction	55
◇ Duplex operation	56
■ Off band indication	56
■ Auto repeater function	57
◇ Frequency range and offset direction	57
8 OTHER FUNCTIONS	58
■ Home Channel Beep function	58
◇ Setting the Home channel	58
◇ Home channel operation	58
■ Using the DTMF Memory	59
◇ Entering a DTMF code	59
■ Transmitting DTMF code	60
◇ Transmitting DTMF code (DTMF Memory)	60
◇ Transmitting DTMF code (Direct Input)	60
◇ Selecting the DTMF transmit speed	61
■ Tone Squelch function	61
◇ Operation	61
◇ Setting the Tone frequency	63
◇ Setting the Repeater Tone frequency	63
◇ Setting the DTCS code	64
◇ Setting the DTCS polarity	64
■ Weather channel operation(USA version only)	65
◇ Weather channel selection	65
◇ Weather alert function	65
■ Cloning function	66
◇ Cloning from a PC using a cloning cable	66
◇ Cloning between transceivers	66
9 INSTALLATION AND CONNECTIONS	68
■ Connecting the controller tothe main unit	68
◇ When using the MBA-4 combination bracket	68
■ Connecting a microphone	68
■ Connecting to a DC power supply	69
■ Installing the controller	69
◇ When installing into your vehicle	69
◇ Attaching to a flat surface	70
■ Installing in a vehicle	71
◇ Using the mounting bracket	71
■ Installing an antenna	72
◇ About Coaxial cable	72
◇ About the internal duplexer	72
■ Connecting to a battery	73
10 OPTIONS	75
11 Bluetooth® OPERATION	76
■ Operating Bluetooth®	76
■ Electromagnetic Interference	76
■ Installing the UT-133	77
■ Pairing with a headset	78
■ VOX function	79
◇ Using the VOX function	79
◇ Setting the VOX level	79
◇ VOX-related settings	80
■ Other headset settings	80
◇ AF Output	80
◇ About the VS-3 headset	81
■ The maximum number ofpaired devices	82
■ Disconnecting from aBluetooth® device	82
■ Deleting a Bluetooth® devicefrom the pairing list	82
■ Resetting the installedBluetooth® unit	83
12 SPECIFICATIONS	84
◇ General	84
◇ Transmitter	85
◇ Receiver	85
13 MAINTENANCE	86
■ Resetting	86
◇ Partial Reset	86
◇ All Reset	86
■ Power protect function	87
■ Spurious signals	87
■ Fuse replacement	87
■ Troubleshooting	88
14 Information	90
Index	91

Match case Limit results 1 per page

MENU MODE

Repeater Tone

(Default: 88.5)

Select a CTCSS tone frequency for repeater or other tone

squelch access.

50 tone frequencies (67.0~254.1 Hz) are selectable.

TSQL Freq

(Default: 88.5)

Select a CTCSS tone frequency for the tone squelch or the

Pocket beep function.

50 tone frequencies (67.0~254.1 Hz) are selectable.

• Tone frequencies

(Unit: Hz)

67.0

69.3

71.9

74.4

77.0

79.7

82.5

85.4

88.5

91.5

94.8

97.4

100.0

103.5

107.2

110.9

114.8

118.8

123.0

127.3

131.8

136.5

141.3

146.2

151.4

156.7

159.8

162.2

165.5

167.9

171.3

173.8

177.3

179.9

183.5

186.2

189.9

192.8

196.6

199.5

203.5

206.5

210.7

218.1

225.7

229.1

233.6

241.8

250.3

254.1

MENU items (Continued)

■

• DTC.TSQ: When you transmit, the DTCS code is superim

posed on your normal signal.

When you receive, the tone squelch opens only

for a signal that includes a matching tone fre-

quency. (Audio is heard)

• DTCS code setting: “CODE”

• DTCS polarity setting: “DTCS-P”

• Tone frequency setting: “C TONE”

• TON.TSQ: When you transmit, the subaudible tone is su

perimposed on your normal signal.

When you receive, the tone squelch opens only

for a signal that includes a matching tone fre-

quency. (Audio is heard)

• Subaudible tone setting: “R TONE”

• Tone frequency setting: “C TONE”

Offset frequency

(Default: 0.600.00*)

Set the frequency offset for duplex (repeater) operation to be-

tween 0 and 59.99500 MHz.

• The duplex shift direction (DUP–/DUP) is set in the duplex

setting screen that is displayed when you hold down [MONI

DUP]

for 1 second in the VFO mode. (p. 50)

*The default value may differ, depending on the frequency

band (selected as the Main band before entering the MENU

mode) and the transceiver version.