Icom IC-2730A Instruction Manual - Page 52

■ VFO and a Memory/Bank scan, DVFO frequency and a Memory/Bank scan DVFO scan and a Memory/Bank scan

Get Icom IC-2730A PDF manuals and user guides View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

6 PRIORITY WATCH ■■VFO and a Memory/Bank scan Example: S equentially checks the Memory channels while receiving on 433.920 MHz. DDVFO frequency and a Memory/Bank scan Sequentially checks the Memory or Bank channels every 5 seconds, while receiving on a VFO frequency. Appears qqSet the VFO frequency. (p. 24) wwSelect the Memory mode. (p. 23) eeHold down [V/MHz SCAN]S for 1 second. rrRotate [DIAL]S to select a desired scan type. ttPush [V/MHz SCAN]S. • The Memory scan starts. yyPush [MENU ]C. • Enters the MENU mode. uuRotate [DIAL]S to select "PRIO" (Priority scan). iiPush [ï]D. ooRotate [DIAL]S to select "ON" or "Bell." • ON: Starts Priority Watch. • Bell: Starts Priority Watch. When a signal is received on the Priority channel, the " " icon appears on the display. !0 Push [ï]D. !1 Push [MAIN BAND]S. • Exits the MENU mode. • The "PRIO" icon appears, and the Priority watch starts. • To cancel the Priority watch, select "OFF" in step o. 47 Checks the Memory channels every 5 seconds. The Memory channels are sequentially checked. DDVFO scan and a Memory/Bank scan Sequentially checks the Memory or Bank channels every 5 seconds during a VFO scan. qqDo steps q through !1 as shown to the left. • The "PRIO" icon appears, and the Priority watch starts. wwHold down [V/MHz SCAN]S for 1 second. eeRotate [DIAL]S to select a desired scan type. rrPush [V/MHz SCAN]S. • The VFO scan starts. Display Side Center Side The C, S, or D in the instructions indicate the area of the controller. C: Center S: Side D: Display

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
47
6
PRIORITY WATCH
■
VFO and a Memory/Bank scan
D
VFO frequency and a Memory/Bank scan
Sequentially checks the Memory or Bank channels every
5 seconds, while receiving on a VFO frequency.
Set the VFO frequency. (p. 24)
q
Select the Memory mode. (p. 23)
w
Hold down [V/MHz SCAN]
e
S
for 1 second.
Rotate [DIAL]
r
S
to select a desired scan type.
Push [V/MHz SCAN]
t
S
.
• The Memory scan starts.
Push [MENU
y
]
C
.
• Enters the MENU mode.
u
Rotate [DIAL]
S
to select “PRIO” (Priority scan).
Push [
i
ï
]
D
.
Rotate [DIAL]
o
S
to select “ON” or “Bell.”
• ON: Starts Priority Watch.
• Bell: Starts Priority Watch.
When a signal is received on the Priority channel,
the “
” icon appears on the display.
!
0
Push [
ï
]
D
.
!
1
Push [MAIN BAND]
S
.
• Exits the MENU mode.
• The “PRIO” icon appears, and the Priority watch starts.
• To cancel the Priority watch, select “OFF” in step
o
.
Example:
Sequentially c
hecks the Memory channels while re-
ceiving on 433.920 MHz.
Checks the Memory channels every
5 seconds.
Appears
The Memory channels are
sequentially checked.
D
VFO scan and a Memory/Bank scan
Sequentially checks the Memory or Bank channels every 5
seconds during a VFO scan.
Do steps
q
q
through
!
1
as shown to the left.
• The “PRIO” icon appears, and the Priority watch starts.
Hold down [V/MHz SCAN]
w
S
for 1 second.
Rotate [DIAL]
e
S
to select a desired scan type.
Push [V/MHz SCAN]
r
S
.
• The VFO scan starts.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display