Icom IC-2730A Instruction Manual - Page 59
■ Using the DTMF Memory, ◇ Entering a DTMF code
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
OTHER FUNCTIONS 8 ■■Using the DTMF Memory The transceiver can store up to 16 Memory channels of 24-digit DTMF codes. • "E" stands for "M" and "F" stands for "#" on the display. DDEntering a DTMF code qqHold down [LOW DTMF]C for 1 second. • Enters the DTMF Menu mode. wwRotate [DIAL]S to select "MEMORY" (DTMF Memory). eePush [ï]D. • Displays the DTMF Memory Selection screen. rrRotate [DIAL]S to select a desired DTMF memory. DTMF memory ttPush [ï]D. • Enters the DTMF Memory Entry mode. Blinks yyRotate [DIAL]S to select a desired number to enter a code. OTHER FUNCTIONS Blinks uuPush [Ω]D to move the cursor backwards, or push [≈]D to move the cursor forwards. • Push [CLR]D to delete the selected code and all codes that are located to the right of the cursor. • W hen the cursor is located to the right edge, the code to the left of the cursor is deleted. • Hold down [CLR]D for 1 second to delete all the code. 8 iiRepeat steps y and u to enter a desired DTMF code. ooAfter entering, push [ï]D. • Beeps sound. • Saves the channel, and returns to the DTMF memory selection screen. !0 Push [MAIN BAND]S. • Exits the DTMF Menu mode. Display Side Center Side The C, S, or D in the instructions indicate the area of the controller. C: Center S: Side D: Display 54