Icom IC-2730A Instruction Manual - Page 34
■ Selecting a Memory or Call channel
View all Icom IC-2730A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4 MEMORY OPERATION ■■Selecting a Memory or Call channel DDSelecting a Memory channel You can select a Memory channels by rotating [DIAL]S in the Memory mode. • Independently selectable on both the left and right bands. qqPush [MR CALL]S. • Selects the Memory mode. wwRotate [DIAL]S to select a Memory channel. • Blank channels are not selected. DDSelecting a Call channel You can select the Call channels (C0/C1) by rotating [DIAL]S in the Call channel mode. Factory default frequencies and operating modes are preset into the Call channels. Change these to suit your operating needs. C0 is for VHF or AIR band, and C1 is for UHF band. • Independently selectable on both the left and right bands. qqHold down [MR CALL]S for 1 second. • Selects the Call channel mode. wwRotate [DIAL]S to select a Call channel. Appears For your reference: Using the HM-207 microphone (p. 6) qqPush [VFO/MR ] to select the Memory mode. wwEnter the Memory channel number, and then push [ENT]. • W hen you enter a 3-digit channel number, pushing [ENT] is not necessary The C, S, or D in the Display Side Center Side instructions indicate the area of the controller. C: Center S: Side D: Display 29 Displays the Call channel number For your reference: Using the HM-207 microphone (p. 6) qqHold down [HOME CALL] for 1 second to select the Call channel mode. wwPush [∫] or [√] to select a Call channel.