Icom MR-1220 Instruction Manual - Page 10
Menu screen operation, Using the context menu, Key Beep
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1 Panel description Menu screen operation You can customize the infrequently changed values or function settings in the Menu screen. Routes in the Menu screen, setting screen and the setting items are described in the following manner: [MENU]/[ ] > System > Key Beep This shows the "Key Beep" item in the "System" menu. The typical operation in the menu screen is as follows: (Example: Turning OFF the Key Beep) 1. Push [MENU]/[ ]. •• The menu screen is displayed. Menu Using the context menu The radar can display a context menu to shortcut to frequently used functions, by holding [ENTER]/[ ] for 1 second. LLThe items in the context menu vary, depending on your operating situation, for example, selected target, display mode, and so on. 1. Move the cursor to a target. •• The target icon is highlighted in orange. 2. Hold down [ENTER]/[ ] for 1 second. •• The context menu is displayed. (Example: An AIS target) 3. Select an item, and then push [ENTER]/[ ]. LLPush [CLEAR]/[ ] to return to the PPI screen. 4. Do the operation in the selected function. Item 2. Push [◄] or [►] to select a menu. (Example: System) 3. Push [▲] or [▼] to select an item (Example: Key Beep), and then push [ENTER]/[ ]. 4. Push [▲] or [▼] to select an option (Example: OFF), or increasing or decreasing the value, and then push [ENTER]/[ ] to apply. 5. Push [MENU]/[ ] to exit the menu screen. NOTE: The Menu screen disappears 10 seconds after the last operation. See the Menu screen section for details on each menu or setting item in the Menu screen. (p. 37) 5