Icom MR-1220 Instruction Manual - Page 24
Bearing and distance measurement, Using the EBL and VRM
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 Distance and direction measurements Bearing and distance measurement This radar has two sets of Electronic Bearing Lines (EBL) and Variable Range Markers (VRM) to indicate the target direction from your vessel to a target. DDUsing the EBL and VRM 1. Move the cursor onto a target. 2. Push [EBL 1 (VRM 1)]/[ ] to display the EBL 1 and VRM 1 markers. 3. Push [◄] or [►] to rotate the Electronic Bearing Line (EBL), and push [▲] or [▼] to increase or decrease the Variable Range Marker's (VRM) ring size. •• The EBL/VRM 1 readout in the lower left corner of the screen indicates the target bearing and distance in orange. 4. Push [ENTER]/[ ] to apply the EBL 1 and VRM 1. •• The EBL 1/VRM 1 readout changes to black. 5. Move the cursor onto another target. 6. Hold down [EBL 1 (VRM 1)]/[ ] for 1 second to move the EBL 1 and VRM 1 to the cursor. LLHold down [EBL 1 (VRM 1)]/[ ] for 1 second again to move the EBL 1 and VRM 1 to the original place. 7. Push [EBL 1 (VRM 1)]/[ ] to clear the EBL 1 and VRM 1. EBL 1/VRM 1 readout EBL 1 marker VRM 1 marker TIP: The indication may differ, depending on the "Bearing Mode" and "Bearing Reference" setting. [MENU]/[ ] > System > Bearing Mode [MENU]/[ ] > System > Bearing Reference •• 0 to 359.9°R: Relative direction, clockwise from the vessel's bow. (when "360°R" is selected) •• P/S 0 to 180°R: Relative direction, left or right from the vessel's bow.(When "PT/SB" is selected) •• 0 to 359.9°T: True bearing. (When "True" is selected in both Bearing Mode and Bearing Reference.) LLBearing data is required. •• 0 to 359.9°M: Magnetic bearing. (When "Magnetic" is selected in Bearing Mode and "True" is selected in "Bearing Reference.") 19