Icom MR-1220 Instruction Manual - Page 31
Activating a Sleeping target, Changing a Active target to sleeping, Warning message by AIS receiver
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
AIS RECEIVER 5 AIS operation DDActivating a Sleeping target 1. Move the cross-line cursor to a sleeping target, and then hold down [ENTER]/[ ] for 1 second. •• The context menu is displayed. 2. Select "Activate AIS" and push [ENTER]/[ ] to activate the selected target. •• The target is activated and its vector line is displayed. DDChanging a Active target to sleeping zz Move the cross-line cursor to an activated target, then hold down [CLEAR]/[ ] for 1 second to change the selected target to sleeping. •• The target is slept and its vector line disappears. DDWarning message by AIS receiver When a target advances within the CPA and TCPA limits, mark changes its color to red and blinks. The message "AIS Collision Warning!" is displayed, and an alarm sounds. Push [CLEAR]/[ ] to cancel the alarm. DDAdding to the Favorite AIS list 1 You can enter up to 10 frequently referred targets to your Favorite AIS list. 2 1. Move the cross-line cursor to a target, and then 3 hold down [ENTER]/[ ] for 1 second. •• The context menu is displayed. 4 2. Select "Add to Favorite" and push [ENTER]/[ ] 5 6 7 •• Favorite Target List window is displayed. 8 3. Select a target number that you want to enter, and then push [ENTER]/[ ] to apply. 9 10 11 12 13 14 •• The target is entered a Favorite Target. 15 When a favorite target enters in the preset range, the pop-up dialog shows the target information as follows: 16 17 18 Push [CLEAR]/[ ] to clear the dialog and return to 19 the operation. LLYou can set the range in the "Range (Favorite Target)" of the Target menu. 20 [MENU]/[ ] > Target > Range (Favorite Target) 21 LLYou can check the Favorite target list from the Target menu. [MENU]/[ ] > Target > Favorite Target List 26