Icom MR-1220 Instruction Manual - Page 26
ALARM FUNCTION, Using an Alarm function
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 ALARM FUNCTION Using an Alarm function the radar has an alarm function to protect your vessel from collisions. the Alarm function alerts you with an alarm sound and message on the screen if a vessel, island, or other obstruction enters (or goes out of) the preset Guard zone(s). You can set the up to two Guard zones by setting ranges and angles. D Setting a Guard zone (Example: Setting the Alarm 1) 1. Select the desired screen range. 2. move the cross-line cursor to the starting point of the alarm zone. 3. Push [Alm 1/2]/[ 1/2] to turn on the Alarm 1. •" " and the preset Guard zone is displayed. 4. Hold down [Alm 1/2]/[ 1/2] for 1 second to enter the Guard zone setting mode. • the inner center of the Guard zone moves to the cursor, and the cross-line cursor disappears. 5. Push [◄] or [►] to adjust the angle (1), and push [▲] or [▼] to adjust the distance of the alarm zone(2). Alarm icon When a target comes into (or goes out of) the Guard zone: • An alarm sounds. • the alert message is displayed. • the Guard zone is highlighted. 1. Push [clEAr]/[ ] to stop the alarm. 2. Push [Alm 1/2]/[ 1/2] to cancel the alarm signal and function. 3. to deactivate the alarm function, push [Alm 1/2]/ [ 1/2] several times. •" " and the Guard zone disappear. 4. to turn on the alarm function again with the same Guard zone, push [Alm 1/2]/[ 1/2]. •" " and the preset alarm zone is displayed. 1 2 Guard zone 6. Push [Alm 1/2]/[ 1/2] to apply the Guard zone. • the cross-line cursor is displayed. • the selected Guard zone remains. You can set the Alarm 2 in the same way. Push [Alm 1/2]/[ 1/2] several times to turn on the Alarm 2. 21