Icom MR-1220 Instruction Manual - Page 39
TLL function, Marking up a place, Clearing a TLL mark, Customizing the TLL settings
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Advanced operation 7 TLL function Using the TLL (Target Latitude and Longitude) function, you can mark up a place on the screen. You can also output the TLL information to an external device through the NMEA 2 connector. DDMarking up a place You can make up to 20 TLL marks. 1. Move the cross-line cursor onto a place where you want to mark up. 2. Hold down [ACQ]/[ ] for 1 second ([TLL]). •• The TLL icon and a number is displayed. TLL mark Information box LLDetails on the TLL mark can be displayed in the Information box by moving the cursor to the TLL mark and pushing [ENTER]/[ ] to select the target. DDClearing a TLL mark 1 1. Move the cross-line cursor onto a TLL mark you want to clear. 2 2. Hold down [CLEAR]/[ TLL mark. ] for 1 second to clear the 3 •• The TLL mark and the number disappears. 4 DDCustomizing the TLL settings 5 You can customize the TLL mark settings in the Menu screen. 6 Display Marks 7 [MENU]/[ ] > Display > Display Marks Selects the TLL mark display type. 8 •• OFF: Does not display TLL marks. •• Symbol: Displays only TLL marks. 9 •• Symbol & Number: D isplays both the Symbols and the Number. 10 TLL Mode 11 [MENU]/[ ] > System > TLL Mode 12 Selects the action when the [ACQ (TLL)]/[ (TLL)] key is held down for 1 second, in the Menu screen. 13 •• Output: Outputs the position information where the cursor is positioned, to 14 the NMEA output terminals. •• Symbol: Marks with an icon and number 15 on the screen where the cursor is positioned. 16 •• Output & Symbol: Outputs the position information and marks on the screen where 17 the cursor is positioned. 18 19 20 21 34