Icom MR-1220 Instruction Manual - Page 23
Checking the bearing and distance from, your vessel, Using the Parallel Index lines
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 Distance and direction measurements Distance measurement DDChecking the bearing and distance from your vessel You can check the bearing and distance to a target by moving only the cross-line cursor to a target. The Cursor Information box in the bottom right corner on the screen displays the position details of the cursor, including the distance and variation from your own position. Cross line cursor Cursor Information box LLLatitude and Longitude (Lat/Lon) or Time To Go (TTG) can be selected as the position format. DDUsing the Parallel Index lines 1 1. Hold down [OFF CENT]/[ ] for 1 second ([PI]/ [ ]). 2 •• The crossed lines are displayed. 2. Push [▲] or [▼] to increase or decrease the 3 interval of lines, and [◄] or [►] to rotate the lines. •• The direction of the Parallel Index lines and the range 4 of lines are displayed in the lower right area of the screen. 5 3. Push [ENTER]/[ ] to set lines. 6 7 8 9 10 Parallel 11 index lines 12 PI 323.4°R 1.200NM Parallel index line readouts 13 14 LLHold down [OFF CENT]/[ ] for 1 second again to 15 clear the Parallel Index lines. 16 17 18 19 20 21 18