Icom MR-1220 Instruction Manual - Page 27
Entering the Power Save mode, Setting the Zone alarm type, Using an Alarm function
View all Icom MR-1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Alarm function 4 Using an Alarm function DDEntering the Power Save mode While the Alarm function is active, you can turn OFF the display while waiting for an alarm, to conserve the battery power. zz Hold down [TX (SAVE)]/[ ] for 1 second while the Alarm 1 and/or 2 function is ON. •• The radar enters Power Save mode, and the display turns OFF. When a target comes into the Guard zone, an alarm sounds, and the display turns ON, and the Power Save mode is canceled. Push [TX (SAVE)]/[ ] to manually cancel the Power Save mode. NOTE: If the alarm icon is " ", the alarm function is invalid because the invalid screen range is selected. In that case, push [+]/[-] until the alarm icon returns to " ." DDSetting the Zone alarm type 1 You can select the alarm type in the Menu screen. Select "Zone Alarm 1" or "Zone Alarm 2" in the 2 System menu. 3 Zone Alarm 1 / 2 [MENU]/[ ] > System > Zone Alarm 1 4 [MENU]/[ ] > System > Zone Alarm 2 5 Selects the Alarm type. •• Enter: An alarm sounds when a target comes into 6 the zone. •• Exit: An alarm sounds when the target goes out of 7 the zone. 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22