Intel D865GLC Manual - Page 38

Always turn off the power and unplug - audio

Get Intel D865GLC - Desktop Board Motherboard PDF manuals and user guides
UPC - 683728198374
View all Intel D865GLC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Table 12: Front Panel Audio Jumper Settings Function Jumper Configuration J9A2 Normal 5 - 6 The audio line signals are routed back to the line connector. and 9- 10 Front audio cable none Audio line out and mic in signals are available for front panel audio connectors on this connector when no jumpers are installed. Table 12a: Front panel Audio Connector Pin Signal name Pin 1 MIC_IN 2 3 MIC_BIAS 4 5 RIGHT_OUT 6 7 Ground 8 9 LEFT_OUT 10 Signal name Ground +5V RIGHT_IN Key LEFT_IN CAUTION! Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing the jumper. Note: There is no jumper setting for configuring the processor speed or bus frequency. The feature for configuring the processor speed is in the Setup program using configure mode. See BIOS Section for information about configure mode. D865GLC Motherboard Manual 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
D865GLC Motherboard Manual
37
Table 12:
Front Panel Audio Jumper Settings
Function
Jumper
J9A2
Configuration
Normal
5 – 6
and
9- 10
The audio line signals are routed back to the line connector.
Front audio
cable
none
Audio line out and mic in signals are available for front panel audio
connectors on this connector when no jumpers are installed.
Table 12a:
Front panel Audio Connector
Pin
Signal name
Pin
Signal name
1
MIC_IN
2
Ground
3
MIC_BIAS
4
+5V
5
RIGHT_OUT
6
RIGHT_IN
7
Ground
8
Key
9
LEFT_OUT
10
LEFT_IN
CAUTION!
Do not move the jumper with the power on.
Always turn off the power and unplug
the power cord from the computer before changing the jumper
.
Note:
There is no jumper setting for configuring the processor speed or bus
frequency.
The feature for configuring the processor speed is in the Setup program
using configure mode.
See BIOS Section for information about configure mode.