Intel D865GLC Manual - Page 70

Drive Configuration Submenu This submenu is for configuring the IDE and Serial-ATA devices. Advanced BIOS SETUP UTILITY Drive Configuration ATA/IDE Configuration Legacy IDE channel PCI IDE Bus Master Hard Disk Pre-Delay 8Primary IDE Master 8Primary IDE Slave 8Secondary IDE Master 8Secondary IDE Slave [Legacy] [PATA Pri and Sec] [Enabled] [Disabled] [MAXTOR 6L6OJ3] [Not Installed] [Samsung CD-ROM] [Not Installed] ←→ ↑↓ Tab Enter F1 F9 F10 ESC Select Menu Select Item Select Field Select sub-menu General Help Setup Defaults Save and Exit Exit Figure 24: Drive Configuration Submenu Table 28: Drive Configuration Submenu ATA/IDE • Disabled Configuration • Legacy • Enhanced (default) Legacy IDE channels • PATA Pri Only • PATA Sec Only • PATA Pri and Sec • SATA P0/P1 Only • SATA P0/P1, PATA Sec • SATA P0/P1, PATA Pri PCI IDE Bus Master • Disabled • Enabled (default) Disabled = All IDE resources disabled Legacy = Up to two IDE channels enabled for operating systems that require legacy IDE operation Enhanced = All Serial ATA (SATA) and Parallel ATA (PATA) resources enabled Configures PATA and SATA resources for operating systems that require legacy IDE operation. PATA = Parallel ATA SATA = Serial ATA Pri = Primary Sec = Secondary P0 = Serial ATA Connector 0 P1 = Serial ATA connector 1 This feature is present only when the ATA/IDE configuration option is set to legacy Enables/disables the use of DMA for hard drive BIOS INT13 reads and writes D865GLC Motherboard Manual 69