Intel D865GLC Manual - Page 72
Diskette Configuration Submenu
UPC - 683728198374
View all Intel D865GLC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
PIO Mode DMA Mode S.M.A.R.T. • Auto (default) • 0 • 1 • 2 • 3 • 4 • Auto (default) • SWDMA0 • SWDMA1 • SWDMA2 • MWDMA0 • MWDMA1 • MWDMA2 • UDMA0 • UDMA1 • UDMA2 • Auto (default) • Disabled • Enabled Sets the PIO mode (This item is read-only unless Type is set to User) Specifies the DMA mode for the drive Auto = Auto-detected SWDMAn = Single Word DMAn SWDMAn = Multi Word DMAn UDMAn = Ultra DMAn (This item is read-only unless Type is set to User) Enables/disables S.M.A.R.T. (Self Monitoring Analysis and Reporting Technologies) (This Item is read-only unless Type is set to User) Cable Detected No Option Displays the type of cable connected to the Parallel ARA IDE interface: 40-conductor or 80-conductor (for ATA-100 peripherals) Note: If an LS-120 drive is attached to the system, a row entitled ARMD Emulation Type will be displayed in the above table. The BIOS will always recognise the drive as an ATAPI floppy drive. The ARMD Emulation Type should always be set to Floppy. Diskette Configuration Submenu This submenu is for configuring the diskette drives. Advanced BIOS SETUP UTILITY Floppy Configuration Diskette Controller Floppy A Diskette Write Protect [Enabled] [1.44/1.25 MB 3½"] [Disable] Configures the integrated diskette controller ←→ ↑↓ Tab Enter F1 F9 F10 ESC Select Menu Select Item Select Field Select sub-menu General Help Setup Defaults Save and Exit Exit Figure 25: Diskette Configuration Submenu D865GLC Motherboard Manual 71