Intel S1200RP Technical Product Specification - Page 140
Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen]
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
BIOS Setup Interface Intel® Server Board S1200V3RP Enable/Disable Onboard/IOM NIC iSCSI Option ROM Load. Comments: This selection is to enable/disable the iSCSI Option ROM that is used by all Onboard and IO Module 1 GbE and 10 GbE controllers. This option is grayed out and not accessible if the 1 GbE or 10GbE PXE Option ROM is enabled or if the 10 GbE FCoE Option ROM is enabled. It can co-exist with an InfiniBand controller Option ROM. If the iSCSI Option ROM is disabled, and no other Option ROM is enabled, the system cannot perform a Network Boot and cannot respond for Wake-on-LAN. This iSCSI option does not appear unless there is an iSCSI -capable NIC installed in the system as an Onboard or IO Module NIC. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] - [Screen Map] 6. Onboard NIC1 Type 7. Onboard NIC2 Type Option Values: string: Intel(R) I210 Dual-Port Gigabit Ethernet Controller Help Text: Comments: Information only. This is a display showing which NICs are available as Network Controllers integrated into the baseboard. Each of these Onboard NICs will be followed by a section including a group of options that are specific to the type of NIC, either as an Ethernet controller or an InfiniBand controller. If a board only has one onboard NIC, the second NIC Type and following options section will not appear. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] - [Screen Map] 8. IO Module 1 Type 9. IO Module 2 Type Option Values: One of these strings: Intel(R) I350 Quad-Port Gigabit Ethernet Module Intel(R) I540 Dual-Port X540 10 Gigabit RJ-45 Module 128 Revision 1.0