Intel S1200RP Technical Product Specification - Page 177
Select BMC IP Source: If [Static], IP parameters may be edited. If [Dynamic], these fields
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Intel® Server Board S1200V3RP BIOS Setup Interface Select BMC IP Source: If [Static], IP parameters may be edited. If [Dynamic], these fields are display-only and IP address is acquired automatically (DHCP). Comments: This specifies the IP Source for IPv4 addressing for the Baseboard LAN. There is a separate IP Source field for the Intel® RMM4 LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC, and its setting determines whether the other Baseboard LAN IPv4 addressing fields are display-only (when Dynamic) or can be edited (when Static). When IPv6 addressing is enabled, this field is grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 2. IP Address Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default] Help Text: View/Edit IP Address. Press to edit. Comments: This specifies the IPv4 Address for the Baseboard LAN. There is a separate IPv4 Address field for the Intel® RMM4 LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The setting of IP Source determines whether this field is display-only (when Dynamic) or can be edited (when Static). When IPv6 addressing is enabled, this field is grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 3. Subnet Mask Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default] Help Text: View/Edit Subnet Mask. Press to edit. Comments: This specifies the IPv4 addressing Subnet Mask for the Baseboard LAN. There is a separate IPv4 Subnet Mask field for the Intel® RMM4 LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The setting of IP Source determines whether this field is display-only (when Dynamic) or can be edited (when Static). Revision 1.0 165