Intel S1200RP Technical Product Specification - Page 144
of the Network Controller corresponding to NIC1, NIC2, IOM1, or IOM2.
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
BIOS Setup Interface Intel® Server Board S1200V3RP 36. IOM2 Port3 MAC Address 37. IOM2 Port4 MAC Address Option Values: Help Text: Comments: Information only. 12 hex digits of the MAC address of Port1- Port4 of the Network Controller corresponding to NIC1, NIC2, IOM1, or IOM2. This display will appear only for ports which actually exist on the corresponding Network Controller. If the Network Controller or port is disabled, the port MAC Address will not appear. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] - [Screen Map] 9.4.2.9 Serial Port Configuration The Serial Port Configuration screen allows the user to configure the Serial A and Serial B ports. In Legacy ISA nomenclature, these are ports COM1 and COM2 respectively. To access this screen from the Main screen, select Advanced > Serial Port Configuration. To move to another screen, press the key to return to the Advanced screen, then select the desired screen. The primary usage for these serial ports is to enable Serial Console Redirection and Serial Over LAN (SOL) capabilities. Either port can be used for Serial Console Redirection but SOL is only supported on Serial A. Screen Field Descriptions: 1. Serial A Enable Figure 27. Serial Port Configuration Screen 132 Revision 1.0