Intel S1200RP Technical Product Specification - Page 178
LAN. There is a separate IPv4 Gateway IP field for the Intel® RMM4 LAN configuration.
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
BIOS Setup Interface Intel® Server Board S1200V3RP When IPv6 addressing is enabled, this field is grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 4. Gateway IP Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default] Help Text: View/Edit Gateway IP. Press to edit. Comments: This specifies the IPv4 addressing Gateway IP for the Baseboard LAN. There is a separate IPv4 Gateway IP field for the Intel® RMM4 LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The setting of IP Source determines whether this field is display-only (when Dynamic) or can be edited (when Static). When IPv6 addressing is enabled, this field is grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 5. IPv6 Option Values: Enabled Disabled Help Text: Option to Enable/Disable IPv6 addressing and any IPv6 network traffic on these channels. Comments: The initial value for this field is acquired from the BMC. It may be changed in order to switch between IPv4 and IPv6 addressing technologies. When this option is set to Disabled, all other IPv6 fields will not be visible for the Baseboard LAN and Intel® RMM4 DMN (if installed). When IPv6 addressing is Enabled, all IPv6 fields for the Baseboard LAN and Intel® RMM4 DMN will become visible, and all IPv4 fields will be grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 6. IPv6 Source Option Values: Static Dynamic 166 Revision 1.0