Intermec PB22 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 25
Charging the Batteries, Understanding the Battery Icons, AC18 4-Bay Battery, Charger Instructions
View all Intermec PB22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 1 - Using the PB22 and PB32 Mobile Label and Receipt Printer Charging the Batteries There are two ways to charge the printer battery: • Charge the battery in the AC18 4-bay battery charger. It takes approximately 4 hours to charge your batteries using the 4-bay battery charger. For information, see the AC18 4-Bay Battery Charger Instructions. • Connect AC power to the printer using a 12 VDC power supply and charge the battery while it is in the printer. The battery takes approximately 3 hours to charge while it is installed in the printer. To charge the battery inside the printer, you need: • an Intermec 12 VDC power supply (Model AE19). • an AC power cord. To charge the battery inside the printer 1 Install the battery in the printer. For help, see the previous section, "Installing the Battery" on page 12. 2 Connect the power supply to the DC power connector on the printer. 3 Connect one end of the power cord to the power supply and then plug the other end into an AC outlet. Understanding the Battery Icons The easiest way to tell the status of your battery is to look at the battery icons on the control panel of the printer. Battery Icon Status Icon Status Battery is fully charged. Battery has a medium charge. You should be able to work for several more hours before charging or replacing the battery. Battery is low. Recharge the battery. Battery is critically low. You need to replace the battery now. PB22 and PB32 Mobile Label and Receipt Printer User Guide 13