Intermec PB22 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 69
Possible Printer Error Icons and Messages - ip link error
View all Intermec PB22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 3 - Troubleshooting and Maintaining the PB22 and PB32 Possible Printer Error Icons and Messages Error Icon Error Message Description Pause The print job is paused. Paper out (IPL) The printer is out of paper. Load a new roll of Out of Paper (Fingerprint) media. For help, see "Loading Media" on page 15. Testfeed not done The printer did not perform a test feed before printing. It is important to perform a test feed because it calibrates the sensor. To perform a testfeed: • In Fingerprint and ESC/P, press the Feed button for more than 1 second. • In IPL Start and close the media door and then Press the Feed button. Printhead hot The printhead is overheated and needs to cool ' down. In IPL, wait for printing to resume automatically. In Fingerprint and ESC/P, you need to restart your print job. Upgrading The printer is loading new firmware. LSS too high, LSS too low These errors can occur when you run a test feed without any media installed, or if you have incorrect media settings. Load the printer with media (see "Loading Media" on page 15), run Test mode (see "Understanding Test Mode" on page 23), and select the appropriate media type. IP configuration The printer is trying to acquire an IP address error from the network. Wait for the printer to complete the task before taking any action. IP link error No network connection. Field out of label You are attempting to print in an area that extends beyond the print window. See the programmer's reference manual for your type of firmware (IPL, Fingerprint, or ESC/P) for information on how to set the media parameters. PB22 and PB32 Mobile Label and Receipt Printer User Guide 57