Intermec PB22 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 74
Resetting the Printer, Cleaning the Printer
View all Intermec PB22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 3 - Troubleshooting and Maintaining the PB22 and PB32 Resetting the Printer You rarely need to reset the printer, unless you are upgrading the firmware. If your printer occasionally locks up, you will want to reset it. A reset reinitializes the 802.11 radio and clears the working memory. Note: The Setup menu is not affected by a reset. Your printer retains all of your configuration settings after the printer powers back up. To reset the Printer 1 Disconnect the printer from power if externally powered. 2 Remove the battery from the printer for at least one second. 3 Insert the battery back into the printer. 4 Reconnect external power if your printer is externally powered. Cleaning the Printer To properly maintain your printer, you must clean it at the recommended interval. Use the next illustration to locate the parts of your printer to clean. Make sure to clean these parts: • Printhead • Platen roller • Paper sensors • Tear bar • Printer exterior • Media compartment To avoid possible personal injury or damage to the printer, never insert any pointed or sharp objects into the printer. 62 PB22 and PB32 Mobile Label and Receipt Printer User Guide