Intermec PB22 PB22 and PB32 Mobile Label and Receipt Printer User Guide - Page 75
Cleaning the Printhead
View all Intermec PB22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 3 - Troubleshooting and Maintaining the PB22 and PB32 Use only the cleaning agents specified in this section. Intermec is not responsible for damage caused by any other cleaning materials used on this printer. Platen roller Tear bar Paper sensor Printhead PB22 and PB32 Mobile Label and Receipt Printer: You need to clean these parts regularly. Cleaning the Printhead Clean the printhead every five rolls of media to prolong the life of the printhead and ensures that you maintain high print quality. Clean the printhead with the cleaning swab. The cleaning swab is shipped with the printer and can also be purchased separately from www.intermec.com. Note: The cleaning swab is the recommended method for cleaning the printhead and platen roller. Using other methods for cleaning may damage the printer. To clean the printhead 1 Open the media cover. 2 Remove the media and ribbon. 3 Use the cleaning swab or cleaning pen to dissolve any contamination on the line of heat-emitting objects at the front/ bottom of the printhead. 4 Wait 30 seconds and carefully rub off any contamination. PB22 and PB32 Mobile Label and Receipt Printer User Guide 63