Intermec SF51 SF51 Cordless Scanner User's Guide - Page 18

Chapter 1 - Learning About the SF51 Understanding the Lights The lights on the SF51 turn on to indicate the status of the battery, a successful decode of a bar code, or the status of the Bluetooth connection. Intermec Ready-to-Work indicator Status light SF51 Lights: The status light turns green or red to indicate the status of the battery and scanning. The blue Intermec Ready-toWork™ indicator turns on to let you know that the SF51 is ready to send data to your host Bluetooth device. Understanding the Status Lights Light State What It Means Blinks green one time The SF51 successfully decoded a bar code and sent the data to the host. The SF51 successfully scanned a configuration bar code. Flashes red when you The battery is low. You need to place the SF51 in the 1- press the Scan bay or 4-bay charger. button Flashes red and stays You scanned a bar code, but the data was not sent to on for 2 seconds the host. You scanned a configuration bar code and the SF51 did not accept it. Off A Bluetooth connection to the host computer is not established. Blinking The SF51 is trying to establish a Bluetooth connection with the host computer, or the SF51 is moving out of range of the host computer. SF51 Cordless Scanner User's Guide 5