Intermec SF51 SF51 Cordless Scanner User's Guide - Page 19

Chapter 1 - Learning About the SF51 Understanding the Status Lights (continued) Light State On What It Means A Bluetooth connection with the host computer has been established. The SF51 is ready to scan bar codes and send data to the host computer. Note: When the SF51 is in the 1-bay or 4-bay charger, the status light indicates the battery charging status. For more information, see the instructions that ship with the charger. Understanding the Beeps The SF51 uses beeps to give you audio feedback when it performs some functions. For example, you hear a beep each time you scan a valid bar code. Understanding the Beep Sequences Beep Sequence What It Means Single beep The SF51 successfully decoded a bar code or scanned a configuration bar code. Series of beeps from The SF51 connected to a Bluetooth host. low to high Series of beeps from A Bluetooth connection has been lost. high to low Three beeps Data was not successfully sent to the host. The SF51 is out of range of the host. A configuration bar code was not successfully scanned. Continuous beeping The host PC is paging the SF51. After you find the for 1 minute SF51, press the Scan button to stop the beeps. For more information about paging the SF51, see "Paging the SF51" on page 30. You can change the beep volume for your needs and environment. You can set the beep volume to Low (quiet), Medium (loud), and High (very loud - default). 6 SF51 Cordless Scanner User's Guide