Intermec SF51 SF51 Cordless Scanner User's Guide - Page 31

Configuring the SF51 Parameters

Get Intermec SF51 PDF manuals and user guides View all Intermec SF51 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Chapter 2 - Connecting and Configuring the SF51 Collecting Data With Your SF51 After you connect your SF51 to your host device, you are ready to start collecting data. The method you use depends on whether you are using: • an Intermec computer. • a host PC. • the SF51 as a keyboard wedge. To collect data with your SF51 1 Establish a Bluetooth connection. 2 Start your data collection application. 3 (Host PC only) Configure your data collection application to receive data from the incoming or outgoing COM port. 4 Scan a bar code with your SF51. The data is entered into your application. For more information, see "Connecting the SF51 to a Host Device" on page 12. Configuring the SF51 Parameters You can configure many parameters on the SF51, such as the bar code symbologies it decodes or the volume of the beeper. These characteristics are controlled by configuration commands. The values you set for these configuration commands determine how the scanner operates. You can configure the SF51: • using EasySet version 5.4 or later. • remotely from your Intermec computer. Configuring the SF51 With EasySet EasySet is an Intermec configuration application that provides you with two ways to configure the SF51: • Send configuration commands directly to the SF51. • Send configuration commands to a bar code setup sheet. You can scan the bar codes onscreen with your SF51 or print the setup sheet and scan the bar codes. You do not need a Bluetooth connection to use this method. 18 SF51 Cordless Scanner User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Chapter 2 — Connecting and Configuring the SF51
18
SF51 Cordless Scanner User’s Guide
Collecting Data With Your SF51
After you connect your SF51 to your host device, you are ready to
start collecting data. The method you use depends on whether
you are using:
•
an Intermec computer.
•
a host PC.
•
the SF51 as a keyboard wedge.
To collect data with your SF51
1
Establish a Bluetooth connection.
2
Start your data collection application.
3
(Host PC only) Configure your data collection application to
receive data from the incoming or outgoing COM port.
4
Scan a bar code with your SF51. The data is entered into your
application.
For more information, see
“Connecting the SF51 to a Host
Device” on page 12
.
Configuring the SF51 Parameters
You can configure many parameters on the SF51, such as the bar
code symbologies it decodes or the volume of the beeper. These
characteristics are controlled by configuration commands. The
values you set for these configuration commands determine how
the scanner operates.
You can configure the SF51:
•
using EasySet version 5.4 or later.
•
remotely from your Intermec computer.
Configuring the SF51 With EasySet
EasySet is an Intermec configuration application that provides
you with two ways to configure the SF51:
•
Send configuration commands directly to the SF51.
•
Send configuration commands to a bar code setup sheet. You
can scan the bar codes onscreen with your SF51 or print the
setup sheet and scan the bar codes. You do not need a
Bluetooth connection to use this method.