Intermec SF51 SF51 Cordless Scanner User's Guide - Page 33

Chapter 2 - Connecting and Configuring the SF51 • One beep means you scanned a valid configuration command. • Three beeps means you scanned an invalid configuration command. Configuring the SF51 From Your Intermec Computer You can configure many settings for the SF51 from your Intermec computer. For descriptions of the configuration commands, see Chapter 4, "Configuration Command Reference." Note: When you connect to an Intermec computer, all SF51 settings that are common to the Intermec computer's internal scanner settings are changed to the default settings of the internal scanner. To configure the SF51 from your Intermec computer 1 Establish a Bluetooth connection with your Intermec computer. For help, see "Connecting to an Intermec Computer" on page 13. 2 On your Intermec computer, start the Intermec Settings application. 3 Select Data Collection > SF51 Scanner Bluetooth Address, where Bluetooth Address is the Bluetooth address of your SF51. 4 Configure commands from the SF51 Scanner menu for your SF51. 5 Select File > Save Settings. The SF51 is updated with the new configuration command settings. 6 Close Intermec Settings. Restoring Default Settings You can restore the SF51 to its default settings by scanning the Administrator Reset Factory Defaults command. For a list of the default settings, see "Configuration Commands By Function" on page 35. 20 SF51 Cordless Scanner User's Guide