Intermec SF51 SF51 Cordless Scanner User's Guide - Page 57

Chapter 4 - Configuration Command Reference EAN.UCC Composite Enables or disables EAN.UCC Composite symbology. An EAN.UCC Composite symbol consists of a linear component (encoding the item's primary identification) associated with an adjacent 2D Composite Component (encoding supplementary data, such as a batch number or expiration date). The Composite symbol always includes a linear component so that the primary identification is readable by all scanning technologies, and so that 2D imagers can use the linear component as a finder pattern for the adjacent 2D Composite Component. Error Beep Enables or disables the error beep. When you scan a configuration bar code that is damaged or unknown, you hear an error beep, and the configuration of the SF51 is not changed. Good Read Beep Duration Sets the length of the SF51 good read beeps. You can set Good Read Beep Duration to a value from 0 (off) to 2550 ms. Use Good Read Beep Duration in combination with Beep Volume and Beep Frequency to define beeps according to operator preference and work environment. Good Read Beep Number Determines the number of beeps used for the good read beep: 1, 2, or none. Good Read Beep Timing Determines if the good read beep happens before or after successfully transmitting data. Good Read LED Duration Sets the amount of time the green Status light stays on after a good read. You can set Good Read LED Duration to a value from 0 (off) to 5110 ms. When the Status light is on due to a long duration time, the SF51 can still read new bar codes and receive commands. 44 SF51 Cordless Scanner User's Guide